|
|
This unique chemical free ozone system solves common water
quality problems such as:
- Iron (Brown Stains)
- Manganese (Black/Grey Stains)
- Bacteria
- Hydrogen Sulfide (Rotton Eggs)
|
- Low pH (Acid Water)
- Taste
- Odor
- Color
|
This system works with all
types of atmospheric vented tanks including above ground holding tanks, buried
cisterns, and roof-top tanks and is compatible with all tank materials.
Each system can be used in a tank up to 10,000 gallons depending
on the severity of the contaminants and the daily water usage. The system works on the
concept of gallons per day and is independent of the gallons per minute
flow rate. The important rule is that no more than 25% of the storage capacity should be
used in a 24 hour period. Higher water usage could result in less than perfect water
because the ozone needs contact time with the water to do its job, plus the water must
pass through the in-tank filter multiple times. In order to calculate minimum tank
size, multiply the maximum daily water usage times 4, although we recommend the tank size
be as large as can be comfortably accommodated.
The best buy tank size for a single home in the US is 2500
gallons which allows the homeowner to use up to about 600 gallons per day for average
contaminants (iron to ~ 10 ppm, or manganese to ~1 ppm, or hydrogen sulfide to ~25 ppm,
etc.) For severe contaminants (iron to ~50 ppm, etc) we recommend either twin storage
tanks in series with a Triple O in each tank (preferred method), or a larger tank with
multiple Triple O units. |
